Paint Booths
VITECH offers Paint Booths Wet and Dry configurations and several different models and sizes as per customer requirements. The Booths are designed to meet with ASHRAE, OSHA, NFPA, and EPA standards and compllies to PCB requirements.The Wet type Paints Booths are configured to suit manual batch operation or coveyorised plant with/without water curtain, using pumps.
Air supply units are provided to ensure dust free clean room conditions with temperature and humidity controls to suit customer requirements.
Sludge seperators are provided for removal of sludge from Booths and water recycling is ensured.
Paint Kitchen and Applicators of reputed brands are provided for continuous operating plant to ensure desired painting characteristics and efficiency.
Hot Air Oven- Paint Curing, Powder Curing Oven
Product Price :Get Latest Price
Product Details:| No of trays | 2.0 |
| Display | Digital |
Large Paint Booths
Product Price :Get Latest Price
Product Details:| Material to be painted | Aluminum |
| Air-Flow Direction | Fully Undershot Type |
| Heating Mode | Electric |
We can provide large paint booths (PBJT) to meet any size as per customer requirement. Suitable for truck bodies, large equipments such as earth movers, windmill structures, vessels, fabricated items,etc. These booths are mostly dry type with downdraft or cross draft arrangements. For fresh air and exhaust filters are provided using high efficiency blowers. Lift arrangement for painter movement in x and y axis movement can also be provided.
Down Draft Dry Type Paint Booth
Product Price :Get Latest Price
Product Details:| Material to be painted | Steel, Wood |
| Air-Flow Direction | Lateral Undershot Type, Cross-Flow Type, Fully Undershot Type |
| Heating Mode | Diesel |
The size of the booth will be 14x 5.4 x 3. 3 m Height . The system is a down Draft dry type paint booth .The air for ventilation will be sucked from the top of the booth , for which a filter will be available for filtration of 10 micron level. The suction is caused by 4 nos blowers .
The internal floor of the booth will be provided with paint absorbing filterhtroughout the length and breadth. Necessary grates on the top of the filtrer frame to facilitate movement of people and material.During the process of painting , the excess spray paint will be absorbed by the paint arresting filters on account of the suctio created by the blowers.The paint free air is sucked by the blowers will be discharged into the atmosphere by means of metallicduct at a height of approximately 10m above ground level.
Down Draft Dry Type Paint Booth
Product Price :Get Latest Price
Product Details:| Material to be painted | Steel |
The size of the booth will be 14x 5.4 x 3. 3 m Height . The system is a down Draft dry type paint booth .The air for ventilation will be sucked from the top of the booth , for which a filter will be available for filtration of 10 micron level. The suction is caused by 4 nos blowers .The internal floor of the booth will be provided with paint absorbing filterhtroughout the length and breadth. Necessary grates on the top of the filtrer frame to facilitate movement of people and material.During the process of painting , the excess spray paint will be absorbed by the paint arresting filters on account of the suctio created by the blowers.The paint free air is sucked by the blowers will be discharged into the atmosphere by means of metallicduct at a height of approximately 10m above ground level.
Dry Paint Booths
Product Price :Get Latest Price
Product Details:| Material to be painted | Plastic, Steel |
These Dry Paint Booths (PBDT) are most popular in the western countries for their simplicity and low power consumption. Provided with paint arresting paper filters which are easy to maintain and dispose. No effluents, less maintenance and low operating costs make it a preferred choice by paint users.
Conveyorised Paint Booths
Product Price :Get Latest Price
Product Details:| Material to be painted | Steel |
| Air-Flow Direction | Cross-Flow Type |
| Heating Mode | Diesel |
We design conveyorised paint booth (PBWT-C) for painting moving components on conveyor sytems for continous production lines. These conveyorised paint booths could be dry or wet type as required above. The booths are suitable for robotic applications also. Components entry & exit provisions are made with side cutout for the easy movement.
Cross Draft Paint Booths
Product Price :Get Latest Price
Product Details:| Material to be painted | Plastic, Steel |
| Heating Mode | Diesel |
Cross Draft Paint Booths are designed for horizontal Air Flow to effectively remove over spray from the spraying area. Fresh air enters the booth through Filters provided on the door and Exhausted through paint arresting filter located at the opposite end by powerful blowers.The Blowers are designed to ensure adequate air flow velocity across the booth and provide ventilation and clean work environment meeting OSHA standards.
The Cross Draft Booth is constructed of Galvanised sheet steel panels which are prepunched, companion flanged and bolted for easy fit and fast assembly. The inlet air filters are mounted on the door frame and can prevent dust down to 10 microns inside the booth. Paint arresting filter are provided at the aftend to capture the paint particles from the air flow stream and clean air is exhausted by the blowers located at the top or rear of the plenum chamber.Adequate lighting is provided inside the booth by a number of tube light fixtures with safety glass protection.
This model is very popular and suitable for large structures, long Products and big vehicles.
Dry Type Side Draft Booth
Product Price :Get Latest Price
Product Details:| Material to be painted | Plastic, Steel |
The Side Down Draft Paint Booth is the ideal paint spray booth, when a downdraft floor pit or raised floor model is not practical. This unique design utilizes some of the same principle of the Downdraft booth. Fresh air is pulled from the cleaner upper levels of the shop and introduced through ceiling filters in the booth. The air is distributed and drawn down and exhausted through the paint arresting filters provided at the bottom side plenums of the booth.
The Side Downdraft provides a healthier working environment and meets OSHA standards.
Wet Paint Booths
Product Price :Get Latest Price
Product Details:| Material to be painted | Steel |
| Air-Flow Direction | Cross-Flow Type |
| Heating Mode | Diesel |
The paint overspray is captured by a wall of water curtain or scrubbed by water before exhaust to the atmosphere. The water curtain is achieved by a pump or without pump. These wet paint booths are ideal for large production rates and for paints with low solid content. Provided with suitable exhaust blower and ideal for continous production lines. A tank is provided for the water and this can be located below or above ground level. Suitable filters are provided at the intake of the water circulation pump. Drainage provisions are also given for draining and cleaning the tank. The tank is protected from corrosion by frp lining. All water contact points are in g.i or s.s construction for long life.
Liquid Paint Booths
Product Price :Get Latest Price
Product Details:| Material to be painted | Steel |
| Air-Flow Direction | Fully Undershot Type, Lateral Undershot Type |
| Heating Mode | Steam, Diesel, Electric |
These Liquid Paint Booths (PBLT) are ideal for painting small components such as test panels, products below 500 mm size, and low production requirements. Max width of the booth is 1200mm. provided with suitable exhaust blower and dry paint arrestor filters.
Dust Collector -Cartridge Type
Product Price :Get Latest Price
Product Details:| Minimum Order Quantity | 50000 Plant |
| Color | Grey |
| Type | Industrial |
We design and manufacture Cartridge Filter Dust Collectors (CFDC) which are used to solve fine dust problems with the most appropriate filter chosen from a wide range of filter media with air flow rates ranging from 500 m3/hr onwards to filter dust level upto 1 microns. The filters are available as Bags supported by cages or as Cartridges in different sizes and suitable for different applications. The filters are cleaned periodically by a pulse of Compressed Air to dislodge the dust accumulated on the filters.Our Bag Filters are designed to provide the most optimum Air to Cloth ratio based on international standards for the most ideal and cost effective performance
Conveyorised Water Wall Type Paint Booth
Product Price :Get Latest Price
Product Details:| Material to be painted | Steel, Plastic |
| Heating Mode | Steam, Infrared Ray, Diesel |
Vitech offers water wall Type paint booth to Customers.
Explore More Products
S. Murugadoss (Manager)
Chennai - 600040, Tamil Nadu, India
© Vitech Enviro Systems Private Limited. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited
